Project " Rosenbergii II "

A quick overview of another rosenbergii rod that I built before my fishing / prawning trip over the weekend.

The blank used was a solid carbon fiber blank measured at 4'8" and ultralight rated.

Carbon insert SG-reel seat with butt-less EVA rear grip and fuji winding check capped at the front of the reel seat.

ALPS stainless steel frame with zirconium ring spinning guides.

Guides lined up placement similar to KR-concept

Pending epoxy coating.

Another view of the guide layout after epoxy.

Three quarter view

Short butt section

Full view

and from the left are  "rosenbergii I" , "rosenbergii II" and matagi fiberglass UL.

All these 3 are good for UL fishing and prawning..

Solid GLASS Prawning ROD

I have used factory made 2 section prawning rod and most often the time, it would not last for two or three sessions before something happened it. I knew I had to built one for the prawn....

I got myself a couple the solid glass blanks from MATAGI and start a new project...  "The ROSENBERGII project"

The original action of the glass blank was quite stiff for prawning. I had to trim down the OD of the blank to make it softer especially at the tip section. The best thing of working with solid glass blank is that you can alter the bending and action to your own liking.

I used SG Graphite reel seat with quick lock and matt carbon tube insert for
the handle.

EVA fighting butt

Guide setting

Rod action

SG- SiC K-guide after epoxy

Guides inline

Completed handle

Finishing at the reel seat beneath the quick lock hood with Fuji winding check

Well, this rod will be put to test on the next prawning session.



UPDATED 11 JANUARY 2016

Just last weekend I tested this rod for prawning at Kinta River. The catch rate was not very good but I managed to hailed up a few good size.

This rod is soft and able to see it tapping when the prawn took the bait, but it is still not sensitive enough.

I think I have to make another rod with smaller taper for a change. Making it as sensitive as possible at the tip while maintaining a good backbone at the rear.