I got myself a couple the solid glass blanks from MATAGI and start a new project... "The ROSENBERGII project"
The original action of the glass blank was quite stiff for prawning. I had to trim down the OD of the blank to make it softer especially at the tip section. The best thing of working with solid glass blank is that you can alter the bending and action to your own liking.
I used SG Graphite reel seat with quick lock and matt carbon tube insert for
the handle.
EVA fighting butt
Guide setting
Rod action
SG- SiC K-guide after epoxy
Guides inline
Completed handle
Finishing at the reel seat beneath the quick lock hood with Fuji winding check
Well, this rod will be put to test on the next prawning session.
UPDATED 11 JANUARY 2016
Just last weekend I tested this rod for prawning at Kinta River. The catch rate was not very good but I managed to hailed up a few good size.
This rod is soft and able to see it tapping when the prawn took the bait, but it is still not sensitive enough.
I think I have to make another rod with smaller taper for a change. Making it as sensitive as possible at the tip while maintaining a good backbone at the rear.
