A Korean made PE 4.0 jigging blank from Black Hole with the length of 1.98m
ALPS titanium Zirconium ring guides.
ALPS custom painted reel seat.
Reel seat testing.
Fore and rear EVA grip.
EVA butt with aluminum trim.
Spiral placement guides with under wrapping.
Epoxy..
Double wrapping
Over view of the full handle.
Overview of the completed rod.
Tuesday, November 15, 2016
BARBARIAN..the solid carbon
This solid carbon blank is not my cup of tea... 😃
It's a tough blank but heavy.
Building it as light as possible with ALPS skeleton reel seat for spinning setup.
Reel seat setting up
Fuji K-guides
The handle without the butt cap
Guides done.
The Killing Rod...
Missed out the photo of the butt view....
Labels:
Barbarian,
bottom fishing,
fisheR fango,
Lemax,
solid carbon fiber
Wednesday, October 19, 2016
Recycling PALMS
How often do you recycle parts from your broken rods? Hmmm.. Let me rephrase that question, how often do you break a rod? LOL... Some broken rods are worthy to have their components recycled and some don't. I am sure you would not want to have a custom rod done up with the USED cheap low quality components.
Normally the guides and quik-lock can be savaged easily but reel seat and butt cap are case to case basis.
These are the guides savaged from the rod. The condition is still good despite of some dirt around the rings. After some soaking and brushing, it will look like brand new... at least from afar.
A new winding check in front of the fore grip.
Normally the guides and quik-lock can be savaged easily but reel seat and butt cap are case to case basis.
These are the guides savaged from the rod. The condition is still good despite of some dirt around the rings. After some soaking and brushing, it will look like brand new... at least from afar.
All the components will be on this MHX blank.
I will try to retain its' original design as close as possible but using EVA foam handle. A new Fuji ACS reel seat with the old KDPS quik-lock from Palms.
Slight different at the butt section. I fixed a butt cap instead of the eva butt.
Putting it all together and it look something like the old design...
A new winding check in front of the fore grip.
The new decal for the new rod.
The guides up. Same number of guides used.
A full view handle of the completed rod.
Labels:
extra fast action,
fisheR fango,
med heavy,
MHX,
PALMS,
rebuilding,
recycle
Wednesday, October 5, 2016
The RED SAGE wannabe..
This is a 9' 5wt 4 section red blank. The color is quite similar to SAGE fly rod in red.
The components used are also similar to SAGE. Full wells Grade AAA cork grip and anodized black uplocking aluminum reel seat with a little fighting butt at the bottom.
The components used are also similar to SAGE. Full wells Grade AAA cork grip and anodized black uplocking aluminum reel seat with a little fighting butt at the bottom.
Hybrid graphite arbors for the reel seat.
Testing fitting the handle.
ALPS titanium zirconium strip guides and REC snake guides.
A closer look at the titanium guide
I used RED nylon thread to give the similar looks as the SAGE rod. The epoxy finished thread will be slightly translucent and the guide foot will be seen after epoxy.
Rod decal was not available and as per request, hand cribble will do...
Completed product...
Labels:
5wt,
9',
custom built,
fighting butt,
fisheR fango,
fly fishing,
flyrod,
SAGE
Saturday, September 17, 2016
Rod Building MARATHON
How often do you do last minute shopping for a rod for an impromptu fishing trip? Well, in my case it is the same but instead of buying, I am building myself a rod for so-called last minute trip.
I have a day to complete the rod for my trip , I have to take into consideration for the epoxy to cure and dry.
This light jigging rod will have only essential components and no fancy wrapping. The blank, guides and handle.
Started the project on Friday 16th September 2016 - 6.13pm
I have a day to complete the rod for my trip , I have to take into consideration for the epoxy to cure and dry.
This light jigging rod will have only essential components and no fancy wrapping. The blank, guides and handle.
Started the project on Friday 16th September 2016 - 6.13pm
Setting up and epoxy the handle right up to wrapping the guides and some interference in between, I managed to get it around 1:00 in the morning.
Started the epoxy prep work right after that and then epoxy. I managed to complete the epoxy around 2:00 in the morning.
The epoxy set and cured in the morning
The simplest and comfortable reel seat handle that I could find in my drawer.
Fuji KR concept guides.
Long handle for jigging rod
EVA butt cap.
This rod officially completed on the Saturday 17th September 2016, 10.00am in the morning.
The rod still have 18 hours for the epoxy to properly dried and free from tackiness.
Labels:
24 hr rod job,
fisheR fango,
light jigging rod,
Rush job
Subscribe to:
Posts (Atom)



















































