Showing posts with label recycle. Show all posts
Showing posts with label recycle. Show all posts

Wednesday, October 19, 2016

Recycling PALMS

How often do you recycle parts from your broken rods? Hmmm.. Let me rephrase that question, how often do you break a rod? LOL... Some broken rods are worthy to have their components recycled and some don't.  I am sure you would not want to have a custom rod done up with the USED cheap low quality components.

Normally the guides and quik-lock can be savaged easily but reel seat and butt cap are case to case basis.






These are the guides savaged from the rod. The condition is still good despite of some dirt around the rings. After some soaking and brushing, it will look like brand new... at least from afar.    
                                                                   




All the components will be on this MHX blank.



I will try to retain its' original design as close as possible but using EVA foam handle. A new Fuji ACS reel seat with the old KDPS quik-lock from Palms.



Slight different at the butt section. I fixed a butt cap instead of the eva butt.



Putting it all together and it look something like the old design...


A new winding check in front of the fore grip.




The new decal for the new rod.



The guides up. Same number of guides used.




A full view handle of the completed rod.









Friday, June 26, 2015

Salvaging and Recycling Rod Parts - Ex Golden Mean

Thanks to my friend who donated his broken Golden Mean rod to me after it broke the 2nd time. I fixed the broken front piece for him but that merely extended 8 months of its' life.

I had the guides removed from the broken rod and kept it for his future project ans I was left with the rod blank and the handle.

The EVA handle was not all the perfect as my friend really bashed or in other words, fully utilized this rod. Then again, it was still usable.

I cut off the old blank, removed the butt cap and inserted a new blank. The only blank that can fit in was the 1 piece MHX 6' 2-6lb blank.

Ta..da..... just turned a 2pc 4-10lb rod into a 1pc 2-6lb UL rod.







Black Fuji KR concept guides with 1st coat of epoxy on the thread.





Then the finishing coat.







The overall look of this partly "recycle" rod.