TRIDENT II -Jigging Rod PE 4-5

This is the same custom jigging blank as the earlier built Trident I but the reel seat and parts used are different.

ALPS aluminium reel seat.

Handle setting out.

ALPS - SS316 Zirconium guides

The grip outlook.

And the completed rod.

(2017-*14)

Light JIGGING rod - CUSTOM Blank

I sold my light jigging rod last year and I guess it's time to build one for my upcoming trip mid of this month.

Trying to use light components to compensate the weight of the blank which is quite heavy due to its' thick blank wall. 

Carbon composite handles

I am leaving the carbon fiber as it is  and not applying any epoxy onto it. Hope this will give me a better grip.

Early set up of the handle.

I am using SG Titanium RSOL guides for this rod which again, I want it to be as light as possible. 

Completed the handle and guides

Overall view of the rod

I would say it's pretty much balanced up.

Tried my best and it still weighs at 141 grams.

( 2017 - #7 ) 

fCJB "Prototype" with Titanium RSOL guides

A couple of months back we started sourcing for some jigging blanks for local waters as there are not many choices of blanks here. Not all the blanks available here are good for jigging.

We managed to make a deal with this factory in China where they produces blanks for some big players in the region. This reputable OEM factory does have a MOQ in order for them to run production for my blanks. 

After a few rounds of blanks sampling and testing, we have decided on the taper, raw material and rod finishing for the blanks.

We wanted to have slimmer blanks and thus, the blank wall have to be thick enough to take the loading and torturing of ripping shear force when the rod is loaded. 

Then came the so called prototype design of the rod. Simple trigger reel seat with cork grip.

Rear view of the rear cork grip.

Setting up of the handle. Noticed the EVA butt at the end? It will be changed to a rubberized butt later on for some reason.

The requirement of guides should robust, light and rust-free. 
We decided to load the rod with SG titanium RSOL guides. A compatible to Fuji Torzite and cheaper...

After assembling the handle, a coat of cork seal was applied to the cork grip.

Wrapping above the fore grip.

Hand scratch rod identity

Wrapping up the guides.

Double check before epoxy

Epoxy to guide wrappings

Cured for 24 hours before seeing the sun light...

Simple black thread wrapping over the guides

Rubberized butt fixed. The rubberized butt is much heavier the EVA butt and we needed the weight to counter balance the rod. 

Balancing act. Now that is why we need to have a heavier behind.

The overall completed rod weigh in at 199 grams, but it felt light in the hand and your arms will be less fatigue when using it. 

(2017 - 6 )

BLACK Charcoal - Jigging Rod

(2017-4)

I was supposed to build up this sample blank for testing last year but had to postponed it so that I could clear some of the back logs orders and rod repair works.

This jigging rod will be as simple as it will get.. It will have the basic trimming and nothing more..  Minimalist...

Standard fuji trigger KDPS reel seat #20, foregrip , rear grip and the fighting butt

Jigging handle setup

One of the common problem of salt water rod is the rusting of the guides.
Of course, it may not be an instant problem but it will weaken the guide foots and who knows when it will fall apart.

I used SG Titanium RSOL guides for this rod. Titanium frame for rust free and the RSOL rings are thinner compared to normal ceramic rings. It has superior thermal conductivity and high friction toughness. All I can say is that it is comparable to Fuji Torzite but a relatively cheaper.

An under layer wrapping was done and coated with epoxy before the guides  placed  and wrap over it.

Static load test before epoxying the guide.  Load testing on the spiral guides to check the guide tilting angle and also the guide spacing

Rod decal.

Epoxy wrapping finishes on the guides

Spiral guide placement 

Rear view of the rod.

Butt section

The completed rod

And this rod weighs at 190 grm.

BLACKHOLE CAPECOD Special - 300th POST... 2016

I guess this 'hole' made it after all... 

It's another BH CapeCod Special "Slow Pitch" blank and this blank does not need any more introduction. It has been known for its' robust action and have been tested in many waters around the world.

This is a very standard built. Basically, guides , trigger reel seat and fighting butt. Anyone could have done this.


Here are the basic components.

Standard setting up for the handle

Fuji K guides on metallic silver underwrap which have been epoxied.

Finished up with the guides.

I am using a high Fuji LC guides for the last guide.

After epoxy.

Handle view from the front.

A view from the rear.

At the fore grip

And the completed rod....

Well, this WILL be the last rod for 2016....