Tuesday, December 27, 2016

Single hand bait casting rod - NFC+Matagi

Once awhile a pretty darn great project will come by ... just like this one. Simple it may seems but it really look great and fish great as well.

A medium power North Fork Composite blank shorten 6" to 6' with a short handle for single hand casting.

Handle setting with MATAGI components.



Finishing off at the reel seat front with Fuji graphite winding check.




Purple color aluminum winding check to compliment the color of the reel seat.




Overall view of the handle.



The rod decal that have not been altered. I have actually removed the 6in from the rod before it was epoxied.




Now, if you look closely at the decal, you will see the difference. :)




I done the handle and epoxy the decal before moving to finish the guides.
Setting of guide placement.



ALPS aurora zirconium 316 stainless steel guides in place with metallic purple wrapping and silver trimming.



Guides line-up



The completed rod .



A view from the rear end.



As the handle is only 6" I have to add some weight at the butt to balance to the rod.






Another view of the completed rod handle.






I guess this would be the last rod for this year. Hope to show you guys more of the rods that I will be building next year.

Have a good year ahead ... and happy ROD building!!!!!  








Monday, December 5, 2016

Jigging rod with Cork Handle

Just completed this yesterday.. Nothing fancy here but just the cork grips and fighting butt. Lightly rated at PE 1-2.5

Fuji T-DPS reel seat with blue aluminum trim and cork rear grip.
Setting up the handle.




The length of the butt end section with cork fighting butt.




Cork fore grip on KDPS quick lock.



Under wrapping before putting on the guides.



Fuji LC low rider guides in black frame. My bad.. I have to re-guide this rod.
It supposedly to be a spiral wrap but I did it straight





Removed and rewrapped to spiral guide placement.





Rod decal after 2 epoxy coating.



Rear view of the rear cork grip.. :)



Bottom half..





Overall view..







































Wednesday, November 16, 2016

United Composites USA - Ultralight

This is the lightest UL rod that I have built so far, it can be lighter though. The blank itself is 44grm.

The blank: 6' with the rating of 4-10lb






Fuji skeleton reel seat with carbon tube insert, EVA grips and fighting butt.




SG- titanium guides with zirconium ring.
This bunch of guides just weigh in at 1 grm.



Handle set up.




Mirco guide system ( MGS ) layout.






The complete rod.






Rod weighting session on my digital scale and recorded weight of 95 grm.
It could still be lighter.....












































Tuesday, November 15, 2016

Black Hole Cape Cod Special "SLOW PITCH" PE 1.5-4

A Korean made PE 4.0 jigging blank from Black Hole with the length of 1.98m





ALPS titanium Zirconium ring guides.




ALPS custom painted reel seat.




Reel seat testing.



Fore and rear EVA grip.




EVA butt with aluminum trim.




Spiral placement guides with under wrapping.





Epoxy..

Double wrapping



Over view of the full handle.




Overview of the completed rod.




BARBARIAN..the solid carbon

This solid carbon blank is not my cup of tea...  ðŸ˜ƒ
It's a tough blank but heavy. 




Building it as light as possible with ALPS skeleton reel seat for spinning setup.
Reel seat setting up




Fuji K-guides





The handle without the butt cap




Guides done.


The Killing Rod...




Missed out the photo of the butt view....